The Kitiki Studio. The Kitiki Studio.
the paragon janus kilns or tumblers at electrictumblers.co.uk   
kilns
more kilns
 
support
 
 
 
 
materials
 
 
 
 
 
 
 
tools
 
 
 
 
 
 
 
 
 
 
extras
 
 
 
 
 
 
 
contact:sales
 
 
 
 
 
 
 
 
 
Paragon Janus 1613 Kiln With A Sentry Programmer For Ceramics, Glass, Porcelain, Pottery, Raku, And Stoneware. Paragon Janus 24 Kiln With A Sentry Programmer For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku. Paragon Janus 27 Kiln With A Sentry Controller For Ceramics, Earthenware, Glass, Porcelain, Pottery, And Raku.
Paragon Janus 23 Kiln With A Sentry Programmer For Ceramics, Glass, Porcelain, Pottery, And Raku.
Paragon Janus 24 Kiln With A Sentry Programmer For Ceramics, Glass, Porcelain, Pottery, And Raku.
Paragon Janus 27 Oven With A Sentry Programmer For Ceramics, Glass, Porcelain, Pottery, And Raku.
Paragon Janus Ovation 1022 Kiln With A Sentry Controller For Ceramics, Glass, Pottery, And Raku.

The Paragon Janus Furnaces For Ceramics, Earthenware, Glass Annealing, Casting, Fusing, Moulding, Sagging, And Slumping, Heat-Treating, LampWork, Porcelain, Pottery, Raku, And Stoneware.

Paragon Janus kilns are generally used for ceramics, earthenware, porcelain, pottery, raku, stoneware, glass work, annealing, casting, fusing, moulding, sagging, slumping, and heat treating, although they have other applications. They're 1290°C kilns with digital programmers, in Paragon blue or customised berry, black, jade, navy, pink, purple, or turquoise. Learn about Paragon Janus kilns on this page.


There are four multi-sided versions, in ascending order of internal size: in the US, the Janus 1613, Janus 23, Janus 27, and Janus Ovation 1022. They're 1290°C, wired-in, top-opening, floor-standing kilns with firebrick interiors and Sentry 12-key programmers.

There's one square version: in the US, the Janus 24. It's a 1290°C, wired-in, front-opening, table-top kiln with a firebrick interior and a Sentry 12-key programmer.


Prices here are transparent: they're for UK-EU voltage, CE marked, CL CSA approved, and TUV tested kilns, and include comprehensive instructions, UK VAT, and free continuing support from a top-tier international distributor.

For prices, trading terms, and secure on-line shopping, use the shop link below the menu bar near the top-right of any page. The order form is on the shop page, after the price list near the bottom.

Kilns that weigh more than 30kg including the packing can't be delivered by a regular parcel-service van: they need a tail-lift lorry with a hydraulic pallet trolley. GB-mainland delivery charges are on the shop page. For other locations, call or mail.

Paragon Janus 1613 Kiln With A Sentry Programmer For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku. Paragon Janus 23 Kiln With A Sentry Controller For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku.
Paragon Janus 1613 Ceramics And Glass Kiln. Paragon Janus 2222 Ceramics, Glass, And Pottery Kiln.
Janus 24 Furnace With A Sentry Programmer For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku. Janus 27 Kiln With A Sentry Programmer For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku.
Paragon Janus 2415 Ceramics And Glass Kiln. Paragon Janus 2822 Ceramics, Glass, And Raku Kiln.
Janus Ovation 1022 Kiln With A Sentry Programmer For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku. Orton-Paragon Sentry Controller.
Paragon Janus Ovation 4222 Ceramics And Glass Kiln. Paragon Sentry programmer.

If you want to look at specific Janus kilns and don't need to read any general introductions, compare or review the main features, or consider other kilns, use the button below to jump down the page. I'll start with the smallest.

Click To Jump To The Janus Kilns.

A GENERAL INTRODUCTION TO THE PARAGON JANUS KILNS

OPTIONAL READING
Paragon Janus 1613 Kiln With A Sentry Programmer For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku. Paragon Janus 2322 Oven With A Sentry Programmer For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku. Paragon Janus 24 Kiln With A Sentry Controller For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku. Paragon Ovation 1012 Kiln With A Sentry Programmer For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku.

The Paragon Janus Kilns For Ceramics, Earthenware, Glass Annealing, Casting, Fusing, Moulding, Sagging, And Slumping, Heat-Treating, LampWork, Porcelain, Pottery, Raku, And Stoneware.

Paragon Janus kilns are generally used for ceramics, earthenware, porcelain, pottery, raku, stoneware, glass work, annealing, casting, fusing, moulding, sagging, slumping, and heat treating, although they have other applications.


There are four multi-sided versions, in ascending order of internal size: in the US, the Janus 1613, Janus 23, Janus 27, and Janus Ovation 1022. They're 1290°C, wired-in, top-opening, floor-standing kilns with firebrick interiors and Sentry 12-key programmers.

There's one square version: in the US, the Janus 24. It's a 1290°C, wired-in, front-opening, table-top kiln with a firebrick interior and a Sentry 12-key programmer.

Janus was the Roman god of gates, doors, beginnings, endings, duality, transitions, and time, often depicted with two faces, looking in opposite directions: ceramics and glass?


Every version is described in detail below so, although there's a comparative table and photos, I recommend that you set aside some time and read about them, because:

Paragon's US kiln names often include numbers to represent dimensions in inches, not mm, or features or version numbers. For the Janus kilns, the numbers 16, 23, 24, and 27 represent the approximate internal widths in inches, 10 represents the number of sides, and 22 represents the internal height.

However, for clarity, I've changed them: the first two digits represent the approximate internal width and the second two represent the approximate internal height, in inches. This leads to the numbers 1613, 2222, 2415, 2822, and 4222. So rely on the descriptions here.

If it helps, there are handy approximate conversions: 1 inch is 25mm, 6 inches is 150mm, 12 inches is 300mm, and 24 inches is 600mm.


If you want to compare kilns you could print the relevant pages. Check first in Print Preview so that nothing will go missing, particularly if you normally use wide margins. Don't print more pages than you need, and fast or economy print will use less ink.

Yours can be in Paragon blue or customised berry, black, jade, navy, pink, purple, or turquoise: : although customised kilns are made to order, so can't be returned if the colour isn't exactly as in the photo. And, for the multi-sided kilns, it's only the control boxes that are painted: not the whole kiln.


They normally have an enhanced Sentry 12-key programmer. Features include thirty-five free-to-set sequences, each one with up to twenty segments, and automatic control over hardware options: an electric kiln vent, a gas injection system, and a USB computer interface. The cone-fire mode, up to cone 10, will simplify your work with ceramics.

Alternatively, you can choose an advanced touch-screen Sentinel Smart Touch controller. Features include those of the Sentry 12-key and real time displays of voltage and current, a novice mode with prompts, firing sequences presented graphically, and wifi connectivity and updates: so a functional upgrade not just a design preference.

When the programmer turns the elements off at, for example, 700°C, residual heat will continue to increase the temperature briefly. A small kiln might overshoot to 715°C before dropping back down. The programmer's software slows down the heating just before the target temperature, reducing any overshoot and improving the accuracy.

Programmers allow you to set up sequences, each one with multiple heating, holding, or cooling segments: so you can choose the heating and cooling rates, target temperatures, and hold times, save the sequences, and re-use them.

Being able to create, edit, and save your own programmes is important because, having experimented and diversified, most people fire materials, or combinations of materials, at different temperatures and for different times than are recommended.

There's a ceramics-glass switch: for ceramics try all the side elements and for glass try the lid and side-middle elements. The different heating options might be better for some applications.


The elements are in dropped recessed grooves in the firebricks. The kilns are fitted with a switch that cuts off power to the elements when the kiln is opened: a UK-EU legal safety requirement.

For the multi-sided versions, the top row of bricks doesn't have an element groove, so the firing chamber is stronger around the top edge where the lid closes. In addition, the two meeting surfaces are hardened with refractory cement.

They all have special-limit nickel-chromium K-type thermocouples. These respond quickly to changes in temperature, resist corrosion, and have an error margin of less than 0.4% instead of the typical 0.8%. However, for continual high-temperature high-precision professional use, these can be upgraded to platinum-rhodium S-types.


The floor-standing kilns include a metal table with lockable casters, a top-shelf cut-out for an optional electric kiln vent, and a bottom shelf for drying greenware or keeping accessories, materials, and tools. It's not a £300 extra.

As a general comment, some tabletop kilns are too heavy or too large for a regular table or worktop. If you can't find a strong one locally, Paragon makes a tough steel table, 768mm x 768mm x 718mm high with lockable casters and two shelves for your accessories, materials, and tools.
If you decide to use an old wooden table, or use a self-assembly table with screw-in legs, it needs to be really stable.
Of course, if kilns come with legs or tables you don't have to use them. You could stand the kiln on a custom worktop if the height is more convenient. However, you'll need to put the kiln on 50mm thick firebricks so that air can circulate.


The US-international kilns don't come with a shelf or posts or kiln wash so, if you don't need a shelf, you won't have to pay for one. However, I've recommended pro kits because durable heavy cordierite shelves resist thermal fracture, provide a smooth stable work surface, protect the floor of the kiln's interior from glass accidents, and help to even out any small temperature deviations during annealing, enamelling, firing, fusing, and heat treating as the elements turn on and off.


For help, or in the unlikely event of a fault, you can mail or call an engineer in the UK. However, checks, adjustments, and repairs are simple, needing little more than a PosiDriv screwdriver: watch the on-line videos using the watch-videos link or read the help pages using use the help link, both below the menu bar near the top of any page. Alternatively, we can service the kiln in our workshop at Cherry Heaven.

CASE HISTORY AND INSPIRATION

OPTIONAL READING
Greek Mask.

The Paragon Janus Kilns For Ceramics, Earthenware, Glass Annealing, Casting, Fusing, Moulding, Sagging, And Slumping, Heat-Treating, LampWork, Porcelain, Pottery, Raku, And Stoneware.

This was an interesting project. A theatre had a corridor running from the ticket area to the front of the stalls. Someone had stuck up some unframed paper posters but the whole area only had a few wall lights and lacked any pre-show magic. A ceramic artist suggested this innovative idea:

The old wall lights were removed and a dummy wall built over the old wall with just enough space behind for new lighting circuits. She made full-size clay masks showing the various characters that had been in past productions, similar to the style of masks used in the Commedia dell'arte, Japanese Noh theatre, and the Venice Carnivals.

The masks were made from a white clay and fired in a Janus-24. Each one had a built-in two-part bracket and was mounted about 30mm off the wall with an LED light behind. For security, the two bracket parts could only be separated with a hex screwdriver from above. The LEDs were on several separate circuits and could be adjusted for brightness and colour.

The final project had 22 masks, each one with an engraved perspex label mounted underneath and just off the surface. It looked really spectacular, especially as the first two were of Punch and Judy and the last one was the creature from Mary Shelley's Frankenstein.

The last I heard was that someone was working on a digital controller that would change the brightness and colours slightly as infra-red detectors were triggered by the audience as they walked past.

APPLICATIONS: WHAT CAN I DO WITH A PARAGON JANUS KILN?

OPTIONAL READING
Ceramic Mask. Glass Art. Raku Bowl. Ceramics.

The Paragon Janus Kilns For Ceramics, Earthenware, Glass Annealing, Casting, Fusing, Moulding, Sagging, And Slumping, Heat-Treating, LampWork, Porcelain, Pottery, Raku, And Stoneware.

You can use these kilns for firing ceramics, earthenware, porcelain, pottery, and stoneware, bisqueware, bone china, ceramic art, painting china, glass panels, crucible glass work, making dolls, annealing beads and glass, fire polishing, glass art, glass fusing, moulding, sagging, and slumping, dichroic glasses, enamelling, sintering gold and silver clays, making jewellery, melting gold and silver, bronze and copper clays, heat treating, knife making, laboratory testing, lampwork, lost-wax casting, crystalline gazes, applying decals, mixing custom glass colours, pâte de verre, raku, staining glass, hardening and tempering blades, cutters, dies, and tools, and many other materials and processes.

You can work with most popular small-scale materials such as Accent Gold, Art Clay metal clays, BullsEye glasses, dichroic glasses, enamels, GlasClay, Image Transfer Solution, Metal Clay Veneer, PMC silver clay, Prometheus bronze clay, ProCopper clay, and SilverEtch.
And an increasingly diverse range of other metal clays, such as Cinter, Clay Mania, Creative, Goldie, Hadar Jacobson, Metal Adventures, Meteor, Noble, and PMC Sterling.

You can make architectural features, bowls, ceramic art, chandeliers, decorations, figurines, flat panels, garden ornaments, glass art, glass panels, knives, lampshades, mugs, ornaments, plant pots, plates, platters, porcelain dolls, raku vases, tableware, tiles, tools, and vases as unique hand-crafted pieces or as repeatable stock for retail.


They're ideal for your arts centre, ceramics studio, college, course venue, craft centre, engineering workshop, glass works, home, pottery business, research unit, school, technical facility, or university.

IS A JANUS KILN THE BEST CHOICE? OPTIONAL READING

The Paragon Janus Kilns For Ceramics, Earthenware, Glass Annealing, Casting, Fusing, Moulding, Sagging, And Slumping, Heat-Treating, LampWork, Porcelain, Pottery, Raku, And Stoneware.

The Janus kilns are hot enough, at 1290°C, for general ceramics and glass work, within their size limits. However, if you think that a smaller, wider, or more specialised kiln might be more suitable, here are some suggestions:


Bead-annealing kilns generally have a maximum temperature of 650°C. For these, look at the BlueBird. However, other kilns have bead doors: the small 1290°C Caldera B and 1095°C SC2B, the medium 1290°C Xpress E12B, and the larger 925°C Fusion 14B. These are all hotter than the BlueBird, so more versatile.

Glass kilns generally have a maximum temperature of 925°C. For these, look at the F Series, Fusion:CS Series, GL Series, or Pearl Series. These are not hot enough for ceramics and porcelain.

Jewellery, silver clay, and enamelling kilns generally have a maximum temperature of 1095°C. For these, look at the small SC Series or the medium Xpress Series. The SC series are not hot enough for ceramics and porcelain.

Vitrigraph kilns generally have a maximum temperature of 1095°C. For these, look at the small Caldera or the medium Vitrigraph.

Ceramics kilns generally have a maximum temperature of 1290°C. For these, look at the small Caldera Series and FireFly Series, medium Xpress Series, or large Janus Series, PMT Series, and TNF Series. These can also be used for glass work.

Heat-treating kilns generally have a maximum temperature of 1095°C or 1290°C. For these, look at the HT Series and PMT Series. Although they look similar, the HT has a bottom-hinged door and the PMT has a side-hinged door.

Knife-making kilns generally have a maximum temperature of 1290°C. The KM Series are made for depth rather than width. You can choose a guillotine, drop-down, or a side-hinged door.

The W Series have a top vent so are usually used for jewellery moulds and lost-wax burnout. For lost-wax casting there are optional wax trays. The small SC Series and most of the medium Xpress Series also have top vents.


To learn more about these and other kilns, use the appropriate links below the menu bar near the top of the page. And remember that each series has kilns of different sizes with different options.


VERSION DESCRIPTION MAX °C WATTS KG INTERIOR INTERIOR SIZE MM
Janus 1613 top opening 1290 4800 93 firebrick eight-sided 419 x 337
Janus 2322 top opening 1290 9600 151 firebrick ten-sided 572 x 514
Janus 2415 front opening 1290 10800 193 firebrick square 610 x 572 x 381
Janus 2822 top opening 1290 11520 227 firebrick twelve-sided 711 x 565
Janus Ovation 4222 top opening 1290 16000 286 firebrick ten-sided 1054 x 572 x 572
Caldera top opening 1290 1800 20 firebrick square 203 x 203 x 171
F130 Elite punty door 925 2400 100 firebrick square 279 x 279 x 330
Fusion CS16D top opening 925 2400 85 firebrick square 406 x 406 x 165
GL22ADTSD front opening 1095 11000 158 firebrick square 533 x 533 x 337
HT22 front opening 1095 7200 158 firebrick square 533 x 533 x 337
KM24 front opening 1290 2600 63 firebrick rectangular 140 x 610 x 108
Pearl 22 top opening 925 7200 146 firebrick square 559 x 559 x 330
PMT21 front opening 1290 9600 192 firebrick square 533 x 533 x 330
TNF2322 top opening 1290 9600 155 firebrick ten-sided 572 x 565
E12 front opening 1290 2700 40 firebrick rectangular 196 x 295 x 219

THE PARAGON JANUS 1613

CERAMICS, GLASS, ANNEALING, CASTING, PORCELAIN, POTTERY, AND RAKU
Paragon Janus 1613 Kiln With A Sentry Programmer For Annealing, Ceramics, Glass, Porcelain, Pottery, And Raku. Paragon Rolling Stand With Casters. Orton-Paragon Sentry Controller. Bartlett-Paragon Sentinel SmartTouch Programmer.

The Paragon Janus 1613 Kiln For Ceramics, Earthenware, Glass Annealing, Casting, Fusing, Moulding, And Slumping, Heat-Treating, LampWork, Porcelain, Pottery, Raku, And Stoneware.

The Paragon Janus 1613 is a 1290°C, eight-sided, wired-in, top-opening, floor-standing, firebrick kiln, with a cone-fire ramp-hold Sentry 12-key programmer. Choose Paragon blue or customised berry, black, jade, navy, pink, purple, or turquoise.


Paragon's kiln names often use numbers to represent dimensions in inches: not mm. In the US, this kiln is called the Janus 1613 although, more accurately, it's 16.5 inches across and 13.25 inches high inside.


The UK-EU kiln is rated at 230V-240V 4800W, so it needs a 20A minimum wired-in power supply. It's fitted with a switch that cuts off power to the elements when the kiln is opened: a UK-EU legal safety requirement. However, never get careless: kilns are very hot and connected to the mains.

The external dimensions are 648mm x 826mm x 737mm high. The case has two lifting handles and there's a wide-view peephole in one of the sides. The lid has handle and a fold-away lockable support. The shipping weight, including the crate, is about 93Kg.

The firing chamber is 419mm x 337mm high, and heats from the lid and sides, with the elements in dropped recessed grooves in the 76mm thick bricks. The kiln has three electro-mechanical relays and a long-life nickel-chromium K-type thermocouple.

For durability, the meeting surfaces of the top row of bricks and the lid are hardened and sealed with refractory cement.

The metal table, shown in the second photo, is 457mm x 457mm x 305mm high and has lockable casters, a top shelf with a cut-out for an optional electric kiln vent, and a bottom shelf for drying greenware or keeping accessories, materials, and tools. It replaces the earlier stand, shown in the first photo.

The programmer's electronic display prompts for heating rates, target temperatures, and hold times, making it easy to set up and re-use accurate heating, holding, and cooling sequences. The cone-fire mode, up to cone 10, will simplify your work with ceramics.


The options, upgrades, and accessories for this kiln are in the on-line shop:

List. a berry, black, jade, navy, pink, purple, or turquoise control boxes respray: normally blue
List. a programmer upgrade: Sentry 12-key to a Sentinel Touch: more useful features: factory fitted
List. a gas injection flow meter with a controlling solenoid: factory fitted
List. an electric kiln vent: factory fitted
List. an auxiliary power output for automatic vent control: factory fitted
List. a USB computer interface: factory fitted
List. a silent long-life mercury relay upgrade: factory fitted
List. a precision long-life S-type platinum-rhodium thermocouple upgrade: factory fitted
List. stacking shelf kits and shelf paper
List. ceramic fibre cloth
List. ceramic block
List. HEPA dust mask
List. clear protective glasses
List. glare-resistant glasses
List. heat-resistant gloves

EXTRACTS FROM REVIEWS, AND MY OPINION

Reviews And Opinions.

The Paragon Janus 1613 is a 1290°C kiln, made for years of continual firing so it's ideal for a ceramics, porcelain, pottery, raku, or glass studio. It's large enough for 360mm diameter bowls and plates and 300mm high pots and vases. At 4800W it heats quickly and will reach its maximum temperature easily even if the elements age or the local voltage drops.


It normally has an enhanced Sentry 12-key programmer. Features include thirty-five free-to-set sequences, each one with up to twenty segments, and automatic control over hardware options: an electric kiln vent, a gas injection system, and a USB computer interface. The cone-fire mode, up to cone 10, will simplify your work with ceramics.

Alternatively, you can choose an advanced touch-screen Sentinel Smart Touch. Features include those of the Sentry 12-key and real time displays of voltage and current, a novice mode with prompts, firing sequences presented graphically, and wifi connectivity and updates: so a functional upgrade not just a design preference.

There's a ceramics-glass switch: for ceramics try all the side elements and for glass try the lid and middle-side elements. The different heating options might be better for some applications.


Although the kiln comes with a separate table, you don't have to use it. The kiln could stand on four firebricks on a strong worktop.


The TNF1613, Xpress 1613, and Janus 1613 are the same size and look similar. The TNF1613 is a 1290°C 6400W kiln with a Sentry 12-key programmer and side elements. The Xpress 1613 is a 1290°C 6400W kiln with a Sentry Xpress 3-key programmer and side elements. And the Janus 1613 is a 1290°C 4800W kiln with a Sentry 12-key programmer, lid and side elements, and a ceramics-glass switch.

THE PARAGON JANUS 1613 KILN FURNITURE
Paragon Shelf Furniture For The Xpress 1613, Janus 1613, and TNF 1613. Stainless Steel Pans for Activated Charcoal: 1 litre or 3 litres. Activated Charcoal: Coal or Coconut. Lost Wax Burnout, Casting, And Enamelling Tray.

The Paragon Janus 1613 Kiln Furniture.

The US-international kiln doesn't come with a shelf or posts or kiln wash. However, there's a recommended kit, not included in the price: one round 381mm x 15mm cordierite shelves, three 12mm shelf posts, and 450gm of kiln wash.

There's an extra recommended kit, not included in the price: one round 381mm x 15mm shelf and three shelf posts. You can choose 12mm, 25mm, 50mm, 75mm, or 100mm posts.

Depending on the material or process, and the sizes of your pieces, stacked shelves will hold more work, free up your time, and reduce the unit firing cost: so you might want extra kits. This kiln has room for three.

Whatever you choose, don't work directly on the floor of the firing chamber as any accidentally melted clay, glass, or metal will ruin the firebricks.


The kiln can accommodate a charcoal-filled stainless steel container needed to fire some makes of bronze clay and copper clay, both described on this internet resource.


The lost-wax burnout tray for this kiln measures 228mm x 216mm x 25mm. There are two parts: a stainless steel tray and a metal mesh that fits into the tray. The melting wax drops into the tray instead of onto the floor of the kiln. The tray and mesh can also be used for supporting beads, enamel work, and fused glass.

THE PARAGON JANUS 2222

CERAMICS, GLASS, ANNEALING, CASTING, PORCELAIN, POTTERY, AND RAKU
The Paragon Janus 2322 Kiln With A Sentry Programmer For Ceramics, Earthenware, Glass, Porcelain, And Raku. Paragon Rolling Stand With Casters. Orton-Paragon Sentry Controller. Bartlett-Paragon Sentinel SmartTouch Programmer.

The Paragon Janus 23 2222 For Ceramics, Earthenware, Glass Annealing, Casting, Fusing, Moulding, And Slumping, Heat-Treating, LampWork, Porcelain, Pottery, Raku, And Stoneware.

The Paragon Janus 2222 is a 1290°C, ten-sided, wired-in, top-opening, floor-standing, firebrick kiln, with a cone-fire ramp-hold Sentry 12-key programmer. Choose Paragon blue or customised berry, black, jade, navy, pink, purple, or turquoise.


Paragon's kiln names often use numbers to represent dimensions in inches: not mm. In the US, this kiln is called the Janus 23. However, it's 22 inches across and 22 inches high inside so not 23 inches anywhere. For clarity, it should have been called the Janus 2222?


The UK-EU kiln is rated at 230V-240V 8918W, so it needs a 38A minimum wired-in power supply. It's fitted with a switch that cuts off power to the elements when the kiln is opened: a UK-EU legal safety requirement. However, never get careless: kilns are very hot and connected to the mains.

The external dimensions are 775mm x 1003mm x 1118mm high. The case has four lifting handles and there are two wide-view peepholes in two of the sides. The lid has an easy-lift, counterbalanced, spring-assisted hinge. The shipping weight, including the crate, is about 151Kg.

The firing chamber measures 572mm x 514mm high, and heats from the lid and sides, with the elements in dropped recessed grooves in the 76mm thick bricks. The kiln normally has three electro-mechanical relays and a long-life nickel-chromium K-type thermocouple.

The top row of bricks doesn't have an element groove, so the firing chamber is stronger around the top edge where the lid closes. In addition, the two meeting surfaces are hardened and sealed with refractory cement.

The metal table, shown in the second photo, is 610mm x 610mm x 305mm high and has lockable casters, a top shelf with a cut-out for an optional electric kiln vent, and a bottom shelf for drying greenware or keeping accessories, materials, and tools. It replaces the earlier stand, shown in the first photo.

The programmer's electronic display prompts for heating rates, target temperatures, and hold times, making it easy to set up and re-use accurate heating, holding, and cooling sequences. The cone-fire mode, up to cone 10, will simplify your work with ceramics.


The options, upgrades, and accessories for this kiln are in the on-line shop:

List. a berry, black, jade, navy, pink, purple, or turquoise control boxes respray: normally blue
List. a programmer upgrade: Sentry 12-key to a Sentinel Touch: factory fitted
List. a gas injection flow meter with a controlling solenoid: factory fitted
List. an electric kiln vent: factory fitted
List. an auxiliary power output for automatic vent control: factory fitted
List. a USB computer interface: factory fitted
List. a silent long-life mercury relay upgrade: factory fitted
List. a precision long-life S-type platinum-rhodium thermocouple upgrade: factory fitted
List. a three-zone K-type nickel-chromium thermocouple upgrade: factory fitted
List. a three-zone long-life S-type platinum-rhodium thermocouple upgrade: factory fitted
List. stacking shelf kits and shelf paper
List. ceramic fibre cloth
List. ceramic block
List. HEPA dust mask
List. clear protective glasses
List. glare-resistant glasses
List. heat-resistant gloves

EXTRACTS FROM REVIEWS, AND MY OPINION

Reviews And Opinions.

The Paragon Janus 2222 is a 1290°C kiln, made for years of continual firing so it's ideal for a ceramics, porcelian, pottery, raku, or glass studio. At 8918W it heats quickly and will reach its maximum temperature easily even if the elements age or the local voltage drops. It's large enough for 510mm diameter bowls and plates and 460mm high pots and vases.


It normally has an enhanced Sentry 12-key programmer. Features include thirty-five free-to-set sequences, each one with up to twenty segments, and automatic control over hardware options: an electric kiln vent, a gas injection system, and a USB computer interface. The cone-fire mode, up to cone 10, will simplify your work with ceramics.

Alternatively, you can choose an advanced touch-screen Sentinel Smart Touch. Features include those of the Sentry 12-key and real time displays of voltage and current, a novice mode with prompts, firing sequences presented graphically, and wifi connectivity and updates: so a functional upgrade not just a design preference.

There's a ceramics-glass switch: for ceramics try all the side elements and for glass try the lid and side-middle elements. The different heating options might be better for some applications.


The firebrick base, which sits in a steel pan, is reversible so, if you do have a glass accident, you won't have to buy a new set of bricks.


The TNF2322, the Janus 2222, and the Viking 2222 are the same size and look similar. The TNF2222 is a 1290°C 9600W kiln with a Sentry 12-key programmer and side elements. The Janus 2222 is a 1290°C 8918W kiln with a Sentry 12-key programmer, lid and side elements, and a ceramics-glass switch. The Viking 2222 is a 1290°C 14400W kiln with a Sentry 12-key programmer, internal fuses, silent long-life mercury relays, and graded side elements for even heat distribution.

THE PARAGON JANUS 2222 KILN FURNITURE
Paragon Shelf Kits For The Janus 23 And TNF23. Stainless Steel Pans for Activated Charcoal: 1 litre or 3 litres. Activated Charcoal: Coal or Coconut. Tray And Mesh For Lost Wax Burnout And Casting.

Shelf Kits For The Paragon Janus 2222 And The Janus 23.

The US-international kiln doesn't come with a shelf or posts or kiln wash. However, there's a recommended kit, not included in the price: two half-round 508mm x 18mm cordierite shelves, six 12mm shelf posts, and 450gm of kiln wash. One full-size shelf would be heavy to put in, move, and take out.

There's an extra recommended kit, not included in the price: two half-round 508mm x 18mm shelves and six shelf posts. You can choose 12mm, 25mm, 50mm, 75mm, 100mm, or 150mm posts.

Depending on the material or process, and the sizes of your pieces, stacked shelves will hold more work, free up your time, and reduce the unit firing cost: so you might want extra kits. This kiln has room for four.

Whatever you choose, don't work directly on the floor of the firing chamber as any accidentally melted clay, glass, or metal will ruin the firebricks.


However, there is an alternative: a 500mm x 500mm x 50mm 1430°C rigidised ceramic-fibre rectangle. It's much lighter than regular ceramic and very easy to cut to shape. The off-cuts can be used as shelf supports. Its high heat-resistance and low thermal-mass make heating and cooling faster, so it's ideal for glass and ceramic kilns.

THE PARAGON JANUS 24

CERAMICS, GLASS, ANNEALING, CASTING, PORCELAIN, POTTERY, AND RAKU
The Paragon Janus 24 Kiln With A Sentry Programmer For Ceramics, Earthenware, Glass, Porcelain, And Raku. Orton-Paragon Sentry Controller. Bartlett-Paragon Sentinel SmartTouch Programmer.

The Paragon Janus 24 For Ceramics, Earthenware, Glass Annealing, Casting, Fusing, Moulding, And Slumping, Heat-Treating, LampWork, Porcelain, Pottery, Raku, And Stoneware.

The Paragon Janus 24 is a 1290°C, square, wired-in, front-opening, table-top, firebrick kiln, with a cone-fire ramp-hold Sentry 12-key programmer. In Paragon black, or customised berry, blue, jade, navy, pink, purple, or turquoise.


Paragon's kiln names often uses numbers to represent dimensions in inches: not mm. In the US, this kiln is called the Janus 24. It's 24 inches across and 15 inches high inside. For clarity, it should have been called the Janus 2415?


The UK-EU kiln is rated at 230V-240V 10800W, so it needs a 45A minimum wired-in power supply. It's fitted with a switch that cuts off power to the elements when the kiln is opened: a UK-EU legal safety requirement. However, never get careless: kilns are very hot and connected to the mains.

The external dimensions are 1029mm x 813mm x 749mm high. The case is slotted for air circulation and has an integral stand: so it keeps cool. It has four lifting handles on opposite sides and two wide-view peepholes in one of the sides. The shipping weight, including the crate, is about 193Kg.

The firing chamber measures 610mm x 572mm x 381mm high, and heats from the top, sides, and door, with the elements in dropped recessed grooves in the 76mm thick bricks. The kiln normally has four electro-mechanical relays and a long-life nickel-chromium K-type thermocouple.

The programmer's electronic display prompts for heating rates, target temperatures, and hold times, making it easy to set up and re-use accurate heating, holding, and cooling sequences. The cone-fire mode, up to cone 10, will simplify your work with ceramics.


The options, upgrades, and accessories for this kiln are in the on-line shop:

List. a berry, black, jade, navy, pink, purple, or turquoise control boxes respray: normally blue
List. a left-hand door hinge
List. a programmer upgrade: Sentry 12-key to a Sentinel Touch: factory fitted
List. a gas injection flow meter with a controlling solenoid: factory fitted
List. an electric kiln vent: factory fitted
List. an auxiliary power output for automatic vent control: factory fitted
List. a USB computer interface: factory fitted
List. a silent long-life mercury relay upgrade: factory fitted
List. a precision long-life S-type platinum-rhodium thermocouple upgrade: factory fitted
List. a three-zone K-type nickel-chromium thermocouple upgrade: factory fitted
List. a three-zone long-life S-type platinum-rhodium thermocouple upgrade: factory fitted
List. stacking shelf kits and shelf paper
List. ceramic fibre cloth
List. ceramic block
List. HEPA dust mask
List. clear protective glasses
List. glare-resistant glasses
List. heat-resistant gloves

EXTRACTS FROM REVIEWS, AND MY OPINION

Reviews And Opinions.

The Paragon Janus 24 is a 1290°C kiln, made for years of continual firing so it's ideal for a ceramics, porcelian, pottery, raku, or glass studio. At 8918W it heats quickly and will reach its maximum temperature easily even if the elements age or the local voltage drops. It's large enough for 520mm diameter bowls and plates and 320mm high pots and vases.


It normally has an enhanced Sentry 12-key programmer. Features include thirty-five free-to-set sequences, each one with up to twenty segments, and automatic control over hardware options: an electric kiln vent, a gas injection system, and a USB computer interface. The cone-fire mode, up to cone 10, will simplify your work with ceramics.

Alternatively, you can choose an advanced touch-screen Sentinel Smart Touch. Features include those of the Sentry 12-key and real time displays of voltage and current, a novice mode with prompts, firing sequences presented graphically, and wifi connectivity and updates: so a functional upgrade not just a design preference.


There's a ceramics-glass switch: for ceramics try all the side elements and for glass try the lid and side-middle elements. The different heating options might be better for some applications.


The Janus 24 and the GL24ADTSD look similar. The Janus 24 is a 1290°C 10800W kiln with a Sentry 12-key programmer, lid and side elements, and a ceramics-glass switch. The GL24ADTSD is a 925°C 10800W kiln with a Sentry 12-key programmer and a power-ratio feature which can balance the heat between the top and sides in increments of 10%.


Finally, a quote from a user: I make porcelain dolls and glass figurines. They're not very large so we use two shelves. Having a front-opener makes it so much easier to fill and empty the kiln: with a top opener we would have to arrange things on the bottom shelf and then lower a heavy second shelf onto its four posts without disturbing things on the bottom shelf.

THE PARAGON JANUS 24 KILN FURNITURE
Paragon Shelf Kits For The GL24 And Janus 24. Stainless Steel Pans for Activated Charcoal: 1 litre or 3 litres. Activated Charcoal: Coal or Coconut. Tray And Mesh For Lost Wax Burnout And Casting.

Shelf Kits For The Paragon Janus 24.

The US-international kiln doesn't come with a shelf or posts or kiln wash. However, there's a recommended kit, not included in the price: one 508mm x 508mm x 18mm cordierite shelf, four 12mm shelf posts, and 450gm of kiln wash.

The pro shelf resists thermal fracture, provides a smooth stable work surface, protects the floor of the kiln's interior from glass accidents, and helps to even out any small temperature deviations during annealing, enamelling, firing, fusing, and heat treating as the elements turn on and off.

Depending on the material or process, and the sizes of your pieces, stacked shelves will hold more work, free up your time, and reduce the unit firing cost: so you might want extra kits. This kiln has room for four.

Whatever you choose, don't work directly on the floor of the firing chamber as any accidentally melted clay, glass, or metal will ruin the firebricks.


However, there is an alternative: a 560mm x 520mm x 50mm 1430°C rigidised ceramic-fibre rectangle. It's much lighter than regular ceramic and very easy to cut to shape. The off-cuts can be used as shelf supports. Its high heat-resistance and low thermal-mass make heating and cooling faster, so it's ideal for glass and ceramic kilns.

THE PARAGON JANUS 2822

CERAMICS, GLASS, ANNEALING, CASTING, PORCELAIN, POTTERY, AND RAKU
The Paragon Janus 27 2822 Kiln With A Sentry Programmer For Ceramics, Glass, Porcelain, And Raku. Paragon Rolling Stand With Casters. Orton-Paragon Sentry Controller. Bartlett-Paragon Sentinel SmartTouch Programmer.

The Paragon Janus 27 2822 Kiln For Ceramics, Earthenware, Glass Annealing, Casting, Fusing, Moulding, And Slumping, Heat-Treating, LampWork, Porcelain, Pottery, Raku, And Stoneware.

The Paragon Janus 2822 is a 1290°C, twelve-sided, wired-in, top-opening, floor-standing, firebrick kiln, with a cone-fire ramp-hold Sentry 12-key programmer. Choose Paragon blue or customised berry, black, jade, navy, pink, purple, or turquoise.


Paragon's kiln names often use numbers to represent dimensions in inches: not mm. In the US, this kiln is called the Janus 27. However, it's 28 inches across and 22 inches high inside so not 27 inches anywhere. For clarity, it should have been called the Janus 2822?


The UK-EU kiln is rated at 230V-240V 10840W, so it needs a 46A minimum wired-in power supply. It's fitted with a switch that cuts off power to the elements when the kiln is opened: a UK-EU legal safety requirement. However, never get careless: kilns are very hot and connected to the mains.

The external dimensions are 922mm x 1265mm x 1016mm high. The case has four lifting handles and there are two wide-view peepholes in one of the sides. The lid has an easy-lift, counterbalanced, spring-assisted hinge. The shipping weight, including the crate, is about 227Kg.

The metal table, shown in the second photo, is 813mm x 813mm x 305mm high and has lockable casters, a cut-out for an optional electric kiln vent, and a bottom shelf for drying greenware or keeping accessories, materials, and tools. It replaces the earlier stand, shown in the first photo.

The firing chamber measures 711mm x 565mm high, and heats from the lid and sides, with the elements in pinless dropped-recess grooves in the 76mm thick bricks. The kiln normally has five electro-mechanical relays and a long-life nickel-chromium K-type thermocouple.

The top row of bricks doesn't have an element groove, so the firing chamber is stronger around the top edge where the lid closes. In addition, the two meeting surfaces are hardened and sealed with refractory cement.

The programmer's electronic display prompts for heating rates, target temperatures, and hold times, making it easy to set up and re-use accurate heating, holding, and cooling sequences. The cone-fire mode, up to cone 10, will simplify your work with ceramics.


The options, upgrades, and accessories for this kiln are in the on-line shop:

List. a berry, black, jade, navy, pink, purple, or turquoise control boxes respray: normally blue
List. a programmer upgrade: Sentry 12-key to a Sentinel Touch: factory fitted
List. a gas injection flow meter with a controlling solenoid: factory fitted
List. an electric kiln vent: factory fitted
List. an auxiliary power output for automatic vent control: factory fitted
List. a USB computer interface: factory fitted
List. a silent long-life mercury relay upgrade: factory fitted
List. a precision long-life S-type platinum-rhodium thermocouple upgrade: factory fitted
List. a three-zone K-type nickel-chromium thermocouple upgrade: factory fitted
List. a three-zone long-life S-type platinum-rhodium thermocouple upgrade: factory fitted
List. stacking shelf kits and shelf paper
List. ceramic fibre cloth
List. ceramic block
List. HEPA dust mask
List. clear protective glasses
List. glare-resistant glasses
List. heat-resistant gloves

EXTRACTS FROM REVIEWS, AND MY OPINION

Reviews And Opinions.

The Paragon Janus 2822 is a 1290°C kiln, made for years of continual firing so it's ideal for a ceramics, porcelian, pottery, raku, or glass studio. At 10840W it heats quickly and will reach its maximum temperature easily even if the elements age or the local voltage drops. It's large enough for 650mm diameter bowls and plates and 510mm high pots and vases.


It normally has an enhanced Sentry 12-key programmer. Features include thirty-five free-to-set sequences, each one with up to twenty segments, and automatic control over hardware options: an electric kiln vent, a gas injection system, and a USB computer interface. The cone-fire mode, up to cone 10, will simplify your work with ceramics.

Alternatively, you can choose an advanced touch-screen Sentinel Smart Touch. Features include those of the Sentry 12-key and real time displays of voltage and current, a novice mode with prompts, firing sequences presented graphically, and wifi connectivity and updates: so a functional upgrade not just a design preference.

There's a ceramics-glass switch: for ceramics try all the side elements and for glass try the top and side-middle elements. The different heating options might be better for some applications.


The firebrick body is in three sections that clip together so it's easy to replace the bricks or elements. The clip-on firebrick base, which sits in a steel pan, is reversible so, if you do have a glass accident, you won't have to buy a new set of bricks.


The control box is hinged at the bottom and drops down for easy access and maintenance. A folding support holds the box open.


The metal table has lockable casters so the kiln can be moved easily, a cut-out for an optional electric kiln vent, and a lower shelf for your accessories, materials, and work.


The TNF2822, the Janus 2822, and the Viking 2822 are the same size and look similar. The TNF2822 is a 1290°C 11500W kiln with a Sentry 12-key programmer and side elements. The Janus 2822 is a 1290°C 11520W kiln with a Sentry 12-key programmer, lid and side elements, and a ceramics-glass switch. The Viking 2822 is a 1290°C 14400W kiln with a Sentry 12-key programmer, internal fuses, silent long-life mercury relays, and graded side elements for better heat distribution. If you prefer a front-opening kiln, look at the Janus 24.


Finally, a quote from a user: This is quite a large kiln. As we only fill it and fire it about twice a week, it's great that the table has lockable casters and we can move the whole kiln out of the way. As it had to be wired in, I'm glad we used a long enough cable.

THE PARAGON JANUS 2822 KILN FURNITURE
Paragon Shelf Kits For The Janus 27 and TNF27. Stainless Steel Pans for Activated Charcoal: 1 litre or 3 litres. Activated Charcoal: Coal or Coconut. Tray And Mesh For Lost Wax Burnout And Casting.

Shelf Kits For The Paragon Janus 2822 And Janus 27-3.

The US-international kiln doesn't come with a shelf or posts or kiln wash. However, there's a recommended kit, not included in the price: two half-round 660mm x 18mm cordierite shelves, six 12mm shelf posts, and 450gm of kiln wash. One full-size shelf would be heavy to put in, move, and take out.

There's an extra recommended kit, not included in the price: two half-round 660mm x 18mm shelves and six shelf posts. You can choose 12mm, 25mm, 50mm, 75mm, 100mm, or 150mm posts.

Depending on the material or process, and the sizes of your pieces, stacked shelves will hold more work, free up your time, and reduce the unit firing cost: so you might want extra kits. This kiln has room for four.

Whatever you choose, don't work directly on the floor of the firing chamber as any accidentally melted clay, glass, or metal will ruin the firebricks.


However, there is an alternative: a 600mm x 600mm x 50mm 1430°C rigidised ceramic-fibre rectangle. It's much lighter than regular ceramic and very easy to cut to shape. The off-cuts can be used as shelf supports. Its high heat-resistance and low thermal-mass make heating and cooling faster, so it's ideal for glass and ceramic kilns.

THE PARAGON JANUS OVATION 4222

CERAMICS, GLASS, ANNEALING, CASTING, PORCELAIN, POTTERY, AND RAKU
The Paragon Janus Ovation 1022 Kiln With A Sentry Programmer For Ceramics, Glass, Porcelain, And Raku. Paragon Rolling Stand With Casters. Orton-Paragon Sentry Controller. Bartlett-Paragon Sentinel SmartTouch Programmer.

The Paragon Janus Ovation 1022 4222 For Ceramics, Earthenware, Glass Annealing, Casting, Fusing, Moulding, And Slumping, Heat-Treating, LampWork, Porcelain, Pottery, Raku, And Stoneware.

The Paragon Janus Ovation 4222 is a 1290°C, ten-sided, oval, wired-in, top-opening, floor-standing, firebrick kiln, with a cone-fire ramp-hold Sentry 12-key programmer. Choose Paragon blue or customised berry, black, jade, navy, pink, purple, or turquoise.


Paragon's kiln names often use numbers to represent dimensions in inches: not mm. In the US, this kiln is called the Janus Ovation 1022. However, although it has 10 sides, it's about 42 inches across and 22 inches high inside. The number of sides isn't very important so, for clarity, it should have been called the Janus 4222?


The UK-EU kiln is rated at 230V-240V 16000W, so it needs a 67A minimum wired-in power supply. It's fitted with a switch that cuts off power to the elements when the kiln is opened: a UK-EU legal safety requirement. However, never get careless: kilns are very hot and connected to the mains.

The external dimensions are 1448mm x 991mm x 1054mm high. The case has four lifting handles and two wide-view peepholes in one of the sides. The lid has an easy-lift, counterbalanced, spring-assisted hinge. The shipping weight, including the crate, is about 286Kg.

The two metal tables, shown in the second photo, are 610mm x 610mm x 305mm high and have lockable casters, cut-outs for an optional electric kiln vent, and lower shelves for your accessories, materials, and work. They replace the earlier stands, shown in the first photo.

The firing chamber measures 1054mm x 572mm x 572mm high, and heats from the lid and sides, with the elements in dropped recessed grooves in the 76mm thick bricks. The kiln normally has four quiet long-life mercury relays and a long-life nickel-chromium K-type thermocouple.

The top row of bricks, and the lid, are sealed and hardened with refractory cement so that the firing chamber is stronger around the top meeting-edges where the lid closes.

The programmer's electronic display prompts for heating rates, target temperatures, and hold times, making it easy to set up and re-use accurate heating, holding, and cooling sequences. The cone-fire mode, up to cone 10, will simplify your work with ceramics.


The options, upgrades, and accessories for this kiln are in the on-line shop:

List. a berry, black, jade, navy, pink, purple, or turquoise control boxes respray: normally blue
List. a programmer upgrade: Sentry 12-key to a Sentinel Touch: factory fitted
List. a gas injection flow meter with a controlling solenoid: factory fitted
List. an electric kiln vent: factory fitted
List. an auxiliary power output for automatic vent control: factory fitted
List. a USB computer interface: factory fitted
List. a silent long-life mercury relay upgrade: factory fitted
List. a precision long-life S-type platinum-rhodium thermocouple upgrade: factory fitted
List. a three-zone K-type nickel-chromium thermocouple upgrade: factory fitted
List. a three-zone long-life S-type platinum-rhodium thermocouple upgrade: factory fitted
List. stacking shelf kits and shelf paper
List. ceramic fibre cloth
List. ceramic block
List. HEPA dust mask
List. clear protective glasses
List. glare-resistant glasses
List. heat-resistant gloves

EXTRACTS FROM REVIEWS, AND MY OPINION

Reviews And Opinions.

The Janus Ovation 4222 is a big high-temperature professional kiln, made for years of continual firing. With a maximum temperature of 1290°C, it's ideal for a ceramics, porcelain, pottery, raku, or glass studio. It's large enough for 500mm diameter bowls and plates and 510mm high pots and vases.


It normally has an enhanced Sentry 12-key programmer. Features include thirty-five free-to-set sequences, each one with up to twenty segments, and automatic control over hardware options: an electric kiln vent, a gas injection system, and a USB computer interface. The cone-fire mode, up to cone 10, will simplify your work with ceramics.

Alternatively, you can choose an advanced touch-screen Sentinel Smart Touch. Features include those of the Sentry 12-key and real time displays of voltage and current, a novice mode with prompts, firing sequences presented graphically, and wifi connectivity and updates: so a functional upgrade not just a design preference.

There's a ceramics-glass switch: for ceramics try all the side elements and for glass try the lid and middle elements. The different heating options might be better for some applications.


Depending on the shapes of the pieces you're working with you can switch the heating from the lid and sides, or just the sides although, usually, lid and sides are for ceramics and sides for glass. If you prefer a front-opening kiln, look at the Janus 24, described below.


The Janus Ovation 4222 is a 16000W kiln with a Sentry 12-key programmer and top-side power-ratio heat distribution. Although they look similar, the Fusion Ovation 1011 and Ovation 1213 are 925°C kilns with Sentry 12-key programmers and top and side elements.


Finally, a quote from a user: This is a very big kiln so I was pleased to find that the counter-balanced spring-assisted lid was easy to lift, even with one hand. Unfortunately, I unwisely tried to move a large glass crucible and knocked it over. So it was a relief, and saved a lot of money, to learn that I could remove the whole bottom and turn it over.

THE PARAGON JANUS OVATION 4222 KILN FURNITURE
Paragon Shelf Kits For The Fusion Ovation-1011 And Janus Ovation-1022. Stainless Steel Pans for Activated Charcoal: 1 litre or 3 litres. Activated Charcoal: Coal or Coconut. Tray And Mesh For Lost Wax Burnout And Casting.

Shelf Kits For The Paragon Ovation 1022.

The US-international kiln doesn't come with a shelf or posts or kiln wash. However, there's a recommended kit, not included in the price: half-oval 533mm x 457mm x 15mm cordierite shelves, six 12mm shelf posts, and 450gm of kiln wash.

The pro shelf resists thermal fracture, provides a smooth stable work surface, protects the floor of the kiln's interior from glass accidents, and helps to even out any small temperature deviations during annealing, enamelling, firing, fusing, and heat treating as the elements turn on and off.

Depending on the material or process, and the sizes of your pieces, stacked shelves will hold more work, free up your time, and reduce the unit firing cost, so there's an extra kit, not included in the price: one half-oval 533mm x 457mm x 15mm shelf and three posts. This kiln has room for three shelves so you can choose 12mm, 25mm, 50mm, 75mm, 100mm, or 150mm props.


Shelf kits aren't included because not everyone wants a full-size shelf. Large shelves are quite heavy if you have to move, remove, or stack them, so you could use half-shelves or lighter ceramic-fibre slabs. Half-sizes, or other sizes, might be better if you want to make several pieces each with different dimensions or irregular shapes. Whatever you choose, don't work directly on the floor of the firing chamber as any accidentally melted glass with ruin the firebricks.


There's an alternative kit, not included in the price: one oval 965mm x 521 x 25mm CoreLite shelf and twelve posts. You can choose 12mm, 25mm, 50mm, 75mm, or 100mm posts.

RECOMMENDED READING
General Help and FAQs For Kilns. Paragon Kiln Shelf Kit. Paragon Relay. Paragon Transformer.

Kilns, Digital Programmers, Kiln Furniture, Options, Upgrades, Firing, Kiln Logs, Accessories, Materials, Parts, Processes, Repairs, And Tools.

The remaining sections are recommended reading, unless you're already using kilns successfully.


Cherry Heaven has been a Paragon distributor since 2002, and commended every year for outstanding performance. Paragon kilns are good value: buy Paragons and you could save enough to treat yourself to a luxury five-star weekend break.

Anyone can buy a kiln to resell and call themselves a specialist, but a top-tier distributor understands all the kilns, options, and upgrades, will stock spares, offers free competent technical support, can help you repair your kiln, provides on-line repair videos, has a repair workshop, and can access Paragon's extensive knowledge-base.

If you need help, you can mail an experienced technician or call . Alternatively, to learn more about how your kiln works, use the help link below the menu bar near the top of the page.

A BRIEF INTRODUCTION TO CLAYS

Natural Clay.

What Is Clay?

Clays are formed naturally over millions of years as rocks break up into minute particles. They consist of hydrous aluminium silicates and other compounds such as feldspar, iron oxides, mica, and quartz. Clays are collectively referred to as ceramics.

Clays are often divided into three main categories: earthenware, porcelain, and stoneware. Generally, they needs to be fired for several hours, although the exact chemical composition affects the firing temperatures and times, and the clays' colour, porosity, shrinkage, and strength.

All clays are created to mature at specific temperatures, and any variance can lead to unsatisfactory results in ceramic durability or color. If fired too high, clay can deform or even melt; if fired too low, your pieces will be dry, rough, and potentially unsolidified.

Historically, low-fire has been the most commonly used firing range due to limitations in kiln technology. Modern kilns are now capable of much more complex, high-temperature processes, but low-fire range continues to be popular because it allows ceramic artists to use a variety of colourants that either burn off or become unstable at higher temperatures.

The maximum cone rating of a stoneware or porcelain clay is the temperature at which it vitrifies. This is the hardening, tightening and finally the partial glassification of the clay. Vitrification results from fusions or melting of the various components of the clay. The strength of fired clay is increased by the formation of new crystalline growth within the clay body, particularly the growth of mullite crystals. Mullite is an aluminum silicate characterized by a long needle-like crystal. These lace the structure together, giving it cohesion and strength.

When clay vitrifies it gets very strong. This is especially important for dinnerware where pieces are exposed to a lot of abuse. Vitrification also makes the clay's porosity low.

EARTHENWARE, PORCELAIN, AND STONEWARE

Earthenware Flower Pot.

What Are Earthenware, Porcelain, And Stoneware?

Earthenware is normally beige, red, or white. It has the lowest firing temperature of the three, usually lower than 1150°C. It's slightly porous, and stains and chips easily, so it's often glazed to protect the surface. Its porosity means it's good for making terracotta planters and oven steamers, but not good for jugs or vases.


Porcelain is composed of kaolin, or china clay. Kaolin doesn't melt until 1800°C, so other compounds are usually added so it can be fired between 1250°C and 1400°C. For example, bone china is made by adding bone ash to the clay. It's known for its whiteness, hardness, smoothness, durability, and translucency. When tapped, it makes a distinctive ping: or ming.

Named after a hill in China from which it was mined for centuries, kaolin is the purest form of clay and is the foundation of all porcelain clay bodies. Though pure kaolin clays can be fired, often they are mixed with other clays to increase both workability and lower the firing temperature, so if using a kaolin-based clay body, be sure to note how pure your material is, as this will change the required temperature.

As a clay body, porcelain is known for its hardness, extremely tight density, whiteness, and translucence in thin-walled pieces. Another difficulty with porcelain bodies is that they are very prone to warping during drying in the kiln

When fired, porcelain becomes a hard, vitrified, non-absorbent clay body, very similar to high-fire stoneware. It also develops a body-glaze layer formed between the clay body and the glaze. The absence of any iron, alkalies, or alkaline earths in the molecular structure of kaolin not only dictate its high-fire requirements, but are also responsible for its most identifiable characteristic: its white color.


Stoneware is normally beige, grey, or red-brown. It's usually fired between 1150°C and 1300°C. It's hard, durable, and resists thermal shock. Glazes bond well, so it can be made waterproof.


Stoneware is a plastic clay, often grey when moist. Getting its name from the dense, rock-like nature of the clay body when fired, stoneware is typically combined with other clays to modify it, such as ball clays which might be added for plasticity. It is important to note that stoneware is divided into two types: mid-fire and high-fire.

Like low-fire bodies, mid-range stoneware is relatively soft and porous and has a clearly separate glaze layer after firing. However, a mid-range firing results in increased durability of the ware as well. When fired, stoneware ranges in color from light grey to buff, to medium grey and brown.

Mid-range glazes typically mature between Cone 4 and Cone 6, and most commercial underglazes have a maximum temperature of Cone 6. These glazes are more durable, still offer a fairly extensive color range, and though not quite as harsh as low-fire glazes, can still be quite bright.

BISQUE

Bisque.

What Is Bisque?

Bisque is clay which has been fired once, without a glaze, to a temperature just before vitrification. Firing changes the clay into ceramic material, without fully fusing it. A second, slower, firing melts the glaze and fuses it to the clay body.

BONE CHINA

Royal Victoria Bone China Cup And Saucer. Wedgewood White Dinner Set. Rose Bouquet Dessert Plates. Royal Albert Bone China Tea Set.

What Is Bone China?

Bone china is a type of porcelain composed of bone ash, feldspathic material, and kaolin. It's the strongest of the porcelain or china ceramics, having very high mechanical and physical strength and chip resistance, and is known for its high levels of whiteness and translucency. Its high strength allows it to be produced in thinner cross-sections than other types of porcelain.

From its initial development and up to the latter part of the 20th century, bone china was almost exclusively English, with production being effectively localised in Stoke-on-Trent. Most major English firms made or still make it, including Fortnum & Mason, Mintons, Coalport, Spode, Royal Crown Derby, Royal Doulton, Wedgwood, and Worcester.

In the UK, references to china or porcelain can refer to bone china, and English Porcelain has been used as a term for it, both in the UK and around the world.

POLYMER CLAY

Polymer Clay Flowers By Olga Zhukova. Polymer Clay Key Rings. Polymer Clay Beads By LiasonWithAlison. Polymer Clay Necklace By Facet Jewellery.

What Is Polymer Clay?

Polymer clay is a man-made material: tiny particles of polyvinyl chloride mixed with plasticisers and pigments. When it's baked, at around 125°C, the particles fuse and the clay hardens.

RAKU

Raku By Lori Duncan. Raku By Brian Seckinger. Raku By Greenwich Community College. Raku By Soley Ceramics.

What Is Raku?

Raku was originally a Japanese technique, but it's now become an internationally popular way to make decorative ware, with each piece having a unique blend of colours.

A bisque piece is fired to about 950°C, then glazed. It's removed from the kiln when red-hot, and put straight into a container of combustible material.

The flames, reducing atmosphere, and mix of chemicals stain the clay. When the piece is removed and quenched in cold water, interesting colours and shades remain: often unpredictable.

A BRIEF INTRODUCTION TO GLASS AND GEMS

Obsidian. Fish. Curved Glass by Infabbrica. Lauscha By Carrie Fertig.

What Is Glass?

The main component of glass is silicon dioxide, often called silica: found naturally and plentifully as sand. When it melts, at around 1700°C, it's like syrup on a cold day. When it cools, it forms a rigid brittle glass called quartz glass.

To lower the melting point, and reduce the cost of melting, chemicals are added: typically sodium carbonate and calcium oxide. Other chemicals, and different heating and cooling processes, produce a range of colours and mechanical properties.

Chemically, glass is defined as an amorphous solid but, as it's heated, it becomes softer allowing it to be blown, cast, coated, decorated, engraved, heat-treated, moulded, poured, pressed, sagged, and slumped.

A form of glass occurs naturally within the mouth of a volcano when the intense heat of an eruption melts sand to form Obsidian, a hard black-to-brown glassy type of stone, shown in the photo. Although it was used decoratively, when it fractures it has very sharp edges, many times sharper than a steel knife-edge, so was also used for tools and weapons: and the pitiful rituals of circumcision and female genital mutilation.

ANNEALING
Annealed Beads Made Into A Necklace.

What Is Annealing?

Very briefly, annealing generally involves heating glass or metal to it's annealing point, maintaining a specific temperature for a set time, and then cooling it to room temperature.

During annealing, fabrication stresses are relieved as the molecules cool and arrange themselves into a regular stable matrix. Successful annealing is the key to creating work that will remain attractive and durable. It can be quite a long process, and involve multiple phases, so a kiln with an automatic comprehensive programmer is essential.

FREE BEAD ANNEALING GUIDE

A Bead Annealing Guide.

You can download, and print, a Bead Annealing Guide. Paragon created it in 2013 so it's only a guide, not a contemporary definitive document. Click here. It's a pdf file, but your device should already have a pdf viewer.

BOILED GLASS
Boiled Glass.

Glass scraps, with optional bubble powder, are put in a tray or a mould and heated. As the temperature increases the glasses begin to bubble. The bubbles mix the colours and give a natural organic appearance. The glasses need to be compatible as different colours and expansion coefficient might not work, so the boiled glass technique needs experiment and practice.

You increase the temperature at about 300°C per hour to 925°C with no bubble squeeze and soak for 10–15 minutes. Then allow the kiln to drop the temperature as fast as possible to about 815°C and soak there for around 30 minutes to allow the little bubbles to rise to the surface and burst. Then reduce to the annealing temperature and soak for the thickness you calculated in preparation for the firing.

CUBIC ZIRCONIA
Cubic Zirconia.

What Are Cubic Zirconia.

Cubic Zirconia is the most popular substitute for a diamond because they look almost dentical. Cubic Zirconia or CZ, is made from zirconium dioxide which comes closer than any other gem to matching the characteristics of a diamond. It's not quite as hard as diamond and is slightly less sparkly but displays more prismatic fire with more colour sparkles within the gem, especially if metal oxides are added during the production process.

Caring for CZ is important because they are more brittle than diamonds and susceptible to wear and tear such as chipping and scratches over time.

DECALS
Rose By Arwen Moore Design.

What Are Decals?

A decal or transfer is an image or pattern printed on a ceramic, cloth, paper, or plastic substrate that can be moved on to another surface, usually with the aid of water and heat.

A wet decal can be slid into position, allowed to dry, and then heated in a kiln. Most ceramic decals come with a cone number for easy firing, typically cone 022. The programmer on the Paragon Fusion 7XL has pre-set cone numbers as well as the normal ramp-hold options used for general glass work.

Decals are a quick and fun way to decorate bottles, glasses, and vases, as most low-fire ceramic decals and low-fire glass decals will work very well, even on float glass.

DIAMONDS
Diamond.

What Are Diamonds?

Diamonds are not a form of glass: they're naturally occurring gems composed of carbon atoms arranged in a very regular pattern.

Between 1 billion to 3.3 billion years ago, simple carbon containing trace minerals was transformed into diamonds by heat and pressure at depths of over 100 miles below the earth’s surface. We can’t mine down far enough to reach the earth’s mantle but fortunately volcanic eruptions brought the diamonds closer to the surface. They're extremely hard and until recently were regarded as the world's hardest natural material.

Although diamonds are extremely expensive, their price is governed by carat, cut, colour, and clarity. It’s very rare to find a diamond that doesn’t contain flaws: however the impurities, and internal refraction and dispersion of light, give diamonds their brilliance.


Synthetic diamonds are manufactured and are identical in hardness, dispersion, gravity, refraction and chemical composition to the highest quality mined diamonds available. Whereas a one-carat top quality diamond would cost thousands of pounds to buy, the same quality man-made diamond could be made for less than £5.

This will obviously have a huge impact on the diamond industry over the next few years as when comparing a cultured and mined diamond side by side they are virtually undistinguishable. A bit like pearls, they can be grown from a single crystal using chemical vapor deposition.

DICHROIC GLASS
Dichroic Glass.

What Are Dichroic Glasses.

Dichroic glass has two different colours: a transmitted colour and a reflective colour, both of which change depending on the angle of view. For example blue-red will be blue in transmission and red in reflection.

During manufacture, quartz and metal oxides are vapourised onto the surface of the glass using a vacuum deposition process, forming a multi-layer crystal structure.

ENAMELLING
Enamelled Jewellery.

What Is Enamelling?

Enamelling involves applying a glass paste to metal and then heating it to fuse it to the surface. The finish of the enamel can be translucent or opaque depending on the temperature used to melt the glass. Higher temperatures result in a more transparent and durable enamel whilst lower temperatures give a more opaque and fragile surface. Dyes and pigments can be included to produce any colour.

The Paragon SC2 is ideal for enamelling, although other kilns are fine. So click the sc2-sc3:jewellery link below the menu bar near the top of the page. The SC-2W and SC-3W doors include a 50mm x 50mm heat-resistant glass viewing-window in the centre of the door, allowing you to take a quick peep at china paints, enamels, glass, and glazes to check on their progress

FIRE POLISHING
Fire Polished Glass.

What Is Fire Polishing?

To fire polish glass, return the items to the kiln and melt them just enough to give a smooth polished appearance. It needs a temperature of around 700°C, and is often used to round the edges of glass after fusing.

Fire polishing already-slumped items is more difficult because the polishing temperature is close to the slumping temperature and it can distort the appearance of the piece. So it generally works best for flat items, rather than slumped ones. It has the slight limitation that the part of the item that touches the kiln shelf won't polish.

FUSING, SAGGING, AND SLUMPING
Fused Glass.

What Is Glass Fusing?

If two or more pieces of glass in contact are heated, they begin to soften and fuse together. With careful heating and cooling, the separate pieces of glass become one.

If glass is put on a mould and heated, it begins to soften and collapse, or sag, onto the mould: a common technique for making bowls and plates.

Sagging and slumping are often thought of as being the same. Correctly: during sagging, heated glass, supported at its edges, sags down in the middle to conform to a mould; during slumping, heated glass, supported at its middle, slumps down at its edges to conform to a mould.

LAMPWORK AND BEADS
Beads.

What Is Lampwork?

Lamp-working is the traditional name for glasswork that uses a flame to melt glass rods and tubes. As the glass softens, it's shaped by turning and using tools.

Early lampworkers used an oil-lamp, and blew air into the flame through a pipe. Later, propane, natural gas, or butane torches replaced the lamp, although kilns are now increasingly popular, particularly for annealing.

Beads are usually made on steel rods, or mandrels. When the beads are finished, the rods are removed leaving holes for threading the beads. Cold working techniques can be used, such as etching, faceting, polishing, and sandblasting.

LOST-WAX BURNOUT
Paragon W13 Lost Wax Casting Kiln With A Sentry Programmer.

What Is Lost Wax Burnout And Casting.

Lost-wax burnout starts with making a wax shape and then making a mould of the shape. When the mould is heated in a kiln, the wax melts out through channels, usually over a burnout grate and into a tray. The shape is then cast in glass or metal from the mould.

It's important to prevent wax or carbon sticking to the elements, so burnout kilns have a top vent to release the fumes. Carbon build-up inside a kiln conducts electricity and can cause the elements to short circuit.

I've written some general instructions here but, as always, making anything successfully needs critical research and frequent tests, especially as things that work for your friends and teachers might not work in the same way for you. It's also very important to learn how to creatively use unexpected effects.

The most popular kilns for lost wax processes are the Paragon W series: the W13, W14, and W18. Learn about these by using the w:lost-wax-burnout link below the menu bar near the top of the page. Wax burnout trays, glare-resistant glasses, and heat-resistant gloves are in the on-line shop.

HOW TO DO LOST WAX BURNOUT

How To Do Lost Wax Burnout And Casting.

1 : Place a metal tray inside the kiln on a few 12mm posts. Place the mould on a grate on top of the tray. The mould’s sprue holes should face down. The tray will catch melting wax as it drips from the sprue holes.

2 : Keep the kiln’s vent hole open during wax elimination. If the kiln has no vent hole, leave the door open 12mm. This allows fumes to escape from the kiln. Heat the kiln to 148°C and hold it at that temperature for at least one hour. Do NOT heat the wax above 148°C.

3 : During this hour, the wax will melt from the mould and drip into the tray. If the kiln gets hotter than 148°C, the wax may smoke and deposit carbon inside your kiln, causing expensive damage.

4 : After one hour at 148°C, open the kiln. Remove the mould and wax tray. Pour the wax from the tray and leave the tray out of the kiln until your next wax elimination. Don't leave the tray in the kiln.

5 : Harden the mould to the temperature recommended by your mould material manufacturer.

6 : Finally, adjust the temperature to the casting temperature of the glass or metal. Hold at that temperature until you are ready to begin casting. Remove the mould with tongs. Wear protective gloves and safety glasses.


Over time, a small amount of carbon can form on the firing chamber walls as any wax residue left in the mould burns off. So I recommend that you periodically open the vent or leave the door open 12mm, and fire the kiln empty to 815°C at a rate of 166°C with a one hour hold.

MOISSANITE
Moissanite.

What Is Moissanite.

Moissanite is another diamond substitute which is a rare mineral found naturally in small quantities, although Moissanite for jewellery is artificially made. It’s made from Silicon Carbide which means it’s able to withstand high temperatures and is very hard.

Moissanite is noticeably much sparklier and displays more prismatic fire than a diamond which is noticeable even to an untrained observer. Moissanite does have inclusions like a diamond and it may also have a greenish tinge to its colour.

PÂTE DE VERRE
Pâte De Verre.

What Is Pâte De Verre?

Pâte de verre involves making a glass paste, applying it to a mould, firing it, and removing the piece from the mould. The glass paste is usually made from glass powder, a binder such as gum arabic, distilled water, and colouring agents or enamels. It allows precise placing of colours in the mould, whereas other techniques often result in the glass straying from its intended position.

I think, currently, Daum is the only large commercial crystal manufacturer using the pâte de verre process for art glass and crystal sculptures.

SLUMPING BOTTLES
Slumped Bottle.

What Is Glass Slumping?

This a simple technique but it requires good ideas. A bottle, such as those used for wine, beer, cola, or champagne, is softened in a kiln so that it begins to flatten out or conforms to a mould. There are too many moulds to stock here but there are lots available on line. Or make your own from clay.

The bottles need to be clean and dry, with all paper labels and tops removed. Put them in your kiln on a shelf, either with shelf paper or kiln wash to prevent the glass sticking to the shelf.

Paragon makes a kiln designed for this: the Trio. So click the trio link below the menu bar near the top of the page. It's wide enough for most bottles but can still use a regular socket.

STAINED GLASS
Stained Glass.

What Is Stained Glass?

Stained glass is glass that has been coloured by adding metallic salts during its manufacture. The coloured glass is crafted into stained glass windows in which small pieces of glass are arranged to form patterns or pictures, traditionally held together by strips of lead and supported by a rigid frame. Painted details and yellow stain are often used to enhance the design.

The term stained glass is also applied to windows in which the colours have been painted onto the glass and then fused to the glass in a kiln.

It requires artistic skill to conceive an appropriate and workable design, and engineering skills to assemble the piece. A window must fit snugly into the space for which it is made, must resist wind and rain, and also, especially in the larger windows, must support its own weight. Many large windows have withstood the test of time and remained substantially intact since the Late Middle Ages.

SWAROVSKI CRYSTAL
Swarovski Crystal.

What Is Swarovski Crystal?

Swarovski Crystal isn’t a gemstone or even a crystal: it’s a form of glass made at high temperatures by melting silicon oxide powders with lead to form what is known as lead crystal. The exact process is patented by Swarovski but it has approximately 32% lead content to increase the crystals refraction index to resemble that of a diamond. To produce a diamond like effect the crystal glass is precision cut and then polished again by a Swarovski patented process that gives the crystal a high quality finish.

The crystals are often further enhanced by coating the glass with an Aurora Borealis or AB coating that gives the surface a rainbow like appearance to simulate dispersion from a diamond. Swarovski crystal is not as hard as diamond so its susceptible to scratches and chipping from wear and tear, but it’s harder than standard glass.

TACK FUSING
Tack Fused Glass.

What Is Tack Fusing?

Tack fusing is the joining together of glass, with as little change to the shape of the pieces as possible. Tack fusing may be used either decoratively, or to assemble a large piece of glass from laminations.

Where tack fusing is used to apply small decorative details to a larger piece, you might want to partially melt the small pieces so that they change shape, usually becoming more spherical under the influence of surface tension, but without changing the shape of the carrier piece. This can be done by using an increased temperature, but only briefly. The carrier piece has a larger thermal mass, so heats up more slowly than the small decorations.

VITRIGRAPH WORK
Glass Stringers. Paragon Caldera Kiln With A Sentry Xpress Programmer For Vitrigraph. Ceramic-Fibre Boards. Crucible.

What Is Vitrigraph?

The vitrigraph process usually uses a Paragon Caldera kiln to make glass stringers. The clip-on bottom of the kiln is removed and set aside. The kiln body is put on a thick ceramic rectangle with a central hole. The rectangle is put on two wall brackets or any stable structure away from the floor.

A crucible of glass is put in the kiln and, as it heats, the moulten glass falls through a hole in the crucible to form long stringers. Skilled artists can control the thickness of the stringers and can even draw with the glass as it comes out.


The Caldera needs a 500mm x 400mm x 50mm rectangle, which we cut for you from a much larger sheet. Normal kiln shelves are made from cordierite: a very dense hard ceramic. A suitable-size rectangle would be fairly heavy and hard to cut and drill, so we we use ceramic-fibre board. Ceramic-fibre rectangles are in the on-line shop.

Ceramic-fibre board is made from vacuum-formed fibre. It doesn't retain heat, has a low thermal conductivity, and is stable at temperatures up to 1430°C. If you need to trim it, use a knife, handsaw, or electric jigsaw, but cut it neatly because, as it's fibrous, you can't use a file or sandpaper successfully.


When you work with any fibrous material, don't get the fibres on your hands or breathe them in: ideally, you should put on gloves, wear a HEPA dust mask, use clear protective glasses, and wash your hands afterwards.

WARM GLASS
Warm Glass Flower Bowl.

What Is Warm Glass?

The term warm glass refers to fusing, slumping, and other glass processes which take place at temperatures between about 600°C to 925°C. Although that doesn't sound warm, it is when you compare it to glassblower's working temperatures, which often exceed 1100°C. Warm glass is sometimes called kiln-formed glass.

PARAGON KILNS INTERNATIONAL DISTRIBUTOR

KILNS, OVENS, FURNACES, PARTS, AND SUPPORT
Paragon Sentry Xpress Programmer PCB. Paragon Type-K Thermocouple. Paragon Relay. Paragon Shelf Kit.

Paragon Kilns, Furnaces, and Ovens For Annealing, Beads, Ceramics, Enamels, Glass, Jewellery, Knife Making, Lost Wax, Silver Clays, Heat Treating, Lampwork, Porcelain, And Vitrigraph.

is a Cherry Heaven internet resource. Cherry Heaven is a top-tier international distributor for Texas-made Paragon kilns, furnaces, and ovens, and has been one of their top-selling partners from 2006 to : a pleasing outcome since the UK is only one third the area of Texas and one fortieth the area of the US.

As this is an on-line resource, there isn't a paper catalogue or a price list. However, you can mail or call a technician about kilns, power supplies, public area safety, a special project, business ideas, diagnostics, repairs, or reselling opportunities.


Art Clay UK. Bartlett kiln Controllers. Cherry Heaven. Electric Kilns. Electric Tumblers. Kitiki. Learning English. Lucas Cameron. Mini Kiln. Orton Kiln Controllers. Oxford English. Paragon Kilns UK. Paragon Kilns US. Professor English. Prometheus Kilns. Paragon Caldera. Paragon CS16D. Paragon KM18. Paragon KM18 PRO. Paragon KM18 XL D Double Barrel. Paragon KM24. Paragon KM24 PRO. Paragon KM24 XL D Double Barrel. Paragon SC2. Paragon Kilns UK. Accent Gold. Accessories And Tools. Art Clay Silver Clay.Paragon BlueBird Bead-Annealing Kilns. Bronze Clay. Paragon Caldera Ceramics Kilns. Paragon Catalogue Ceramics. Copper Clay. Silver Clay Courses. Photos Of Dorset. Paragon Dragon Ceramics And Glass Kilns. Eco-Green Practices. Frequently Asked Questions. Frequently Asked Questions. All About Firebricks. Paragon Fusion Glass Kilns. Paragon F LampWorking Kilns. Glass. Paragon GL Glass Kilns. Kiln Help. Paragon Home Artist Kilns. Paragon HT Heat-Treating Kilns. Image Transfer Solution. Paragon Janus Ceramics Kilns. Paragon KM Knife-Making Ovens. Kennet Equipment Leasing Limited. Lost-Wax Burnout And Casting. Contact By Mail. West Holme Map. Metal Clay Veneer. About Me. Paragon Pearl Glass Kilns. Kiln Photos. Paragon PMT Heat-Treating Furnaces. Programmers. Paragon SC Jewellery Kilns. Silver Etch. Paragon Kilns Shop. Paragon TNF Ceramics Kilns. Paragon Trio Slumping Kiln. Tumblers And Polishers. TV Programmes. Paragon Viking Ceramics Kilns. Paragon Vitrigraph. Paragon Vulcan Crucible And Glass Kilns. Paragon W Jewellery Kilns. Paragon Xpress Ceramics Kilns.


UK To EU Plug Adapter.
Ceramic Block.
Ceramic Cloth.
EU Plug.
UK-EU Adapter.
Dry Powder Extinguisher.
Glare Resistant Glasses.
HEPA Mask.
heat-resistant Gloves.
Kitiki Cutters.
Kitiki Flush Cutters.
Kitiki Flat-Nose Pliers.
Kitiki Pointed-Nose Pliers.
Kitiki Bent-Nose Pliers.
Kitiki Round-Nose Pliers.
Protective Glasses.
Potter & Brumfield Relay.
Dorset, SW England.
UK 13A Plug.
Large Rubber Drum 950gm Open
The AX-4 Digital Controller.
MiniKiln Closed.
Bartlett-Paragon Touch Screen Digital Controller.
Paragon BlueBird Bead Annealing Kiln.
Lauscha by Carrie Fertig.
Activated Charcoal Granules.
Paragon Caldera Ceramics And Glass Kiln.
Paragon Caldera Bead, Enamels, And Glass Kiln.
Paragon Crucible.
Paragon Fusion CS14D Glass Kiln.
Paragon Fusion CS14SB Glass And Bead Kiln.
Paragon Caldera XL Ceramics Kiln.
Paragon F500 Lampwork Kiln.
Paragon FireFly Ceramics Kiln.
Paragon Fusion 7 Glass Kiln.
Paragon Fusion 8 Glass Kiln.
Paragon GL18ADTSD Glass Kiln.
Paragon HT-14D Heat Treating Furnace.
Paragon Janus 1613 Ceramics Kiln.
Paragon KM18D Knife Making Oven.
Paragon-Orton Vent Master: Unassembled.
Paragon-Orton Vent Master: Suction Cup.
Paragon Pearl 22 Glass Kiln.
Paragon PMT21 Heat Treating Kiln.
Paragon Door Peephole And Vent.
Stainless Steel Pans.
Paragon SC-2 Black Jewellery Kiln.
Paragon SC2 Jewellery Kiln.
Paragon SC2B Bead-Door Kiln.
Paragon SC2W Enamelling Kiln.
Paragon SC4 Glass Kiln.
Paragon SC2BW Jewellery And Bead Kiln.
Paragon SC2D Pro-3 Jewellery Kiln.
Paragon SC2 Shelf Kit.
Paragon SC-2 Jade Jewellery Kiln.
Paragon SC-2 Black Jewellery Kiln.
Orton-Paragon Sentry Xpress Programmer.
Orton-Paragon Sentry Programmer.
Bartlett-Paragon Sentinel Touch-Screen Controller.
Paragon SC-2 Pink Jewellery Kiln.
Paragon SC-2 Pro Black Jewellery Kiln.
Paragon SC-2 Turqoise Jewellery Kiln.
Paragon SC-2 Purple Jewellery Kiln.
Paragon SC-2 Navy Jewellery Kiln.
Paragon SC-2 Berry Jewellery Kiln.
Paragon ST-8 Kiln Table.
Paragon Kiln Table With Casters.
Paragon TNF 1613 Ceramics Kiln.
Paragon GL24 Kiln Table.
Paragon Xpress 1613 Top Row Of Bricks.
Paragon W Lost-Wax Casting Kiln.
Paragon Lost-Wax Burnout Tray With Grille.
Paragon Lost-Wax Burnout Tray With Grid.
USB Plug.
Paragon Xpress E-12 Jewellery Kiln.
Paragon Xpress E-12B Bead Kiln.
Paragon Xpress E-14 Glass Kiln.
Paragon Xpress Q-11 Ceramics Kiln.
Paragon Vitrigraph Kiln.
Prometheus Pro-7.